Communicate with Supplier? Supplier
Anna An Ms. Anna An
What can I do for you?
Chat Now Contact Supplier

Ningbo Santwell Imp & Exp Co.,Ltd

Products

Home > Products > Junction Box and Load cell Accessories > 4 Ways Junction Box > JBG-4 Stainless steel junction box of load cell

JBG-4 Stainless steel junction box of load cell
JBG-4 Stainless steel junction box of load cell
JBG-4 Stainless steel junction box of load cell
JBG-4 Stainless steel junction box of load cell

JBG-4 Stainless steel junction box of load cell

Payment Type: L/C,T/T,D/P,Paypal,Money Gram,Western Union
Incoterm: FOB,CFR,CIF,EXW,FCA,CPT,CIP
Min. Order: 1 Piece/Pieces

Basic Info

    Model No.: JBG-4

Additional Info

    Packaging: pcs/carton

    Productivity: 1000pcs/month

    Brand: santwell

    Transportation: Ocean,Land,Air

    Place of Origin: Zhengjiang,China

    Supply Ability: 1000pcs/month

    HS Code: 8423900090

    Port: Ningbo,Shanghai,Other

Product Description




Features:

Plastic housing, durable and cost-effective
Both the housing and the wire connector are waterproof and have good sealing
Good temperature stability and anti-interference performance
The power supply has reverse connection protection, surge protection and overcurrent protection functions
Strong loading capacity, better use with cable box
Small size, light weight and easy installation
Suitable for various strain sensors such as weighing, tensile pressure, torque, tension, etc.


Products Description


Technical Parameter
Input Signal
mV
Work Power
12VDC~24VDC
Sensor Voltage
5VDC
Output signal
4~20mA、0~5V、0~10V Dip adjustment
Work Temp.
-20~60℃
Accuracy
±0.3%F.S
Work Humidity
<90%RH
Water Proof
IP65
Install method
Fix of housing
Load Capacity
Max connect with 4pcs 350Ω
Dimensions: (mm)
Wiring Definition

DIP switch:

When the DIP switch is set to 1,2, it will output 0-5V and 4-20mA
When DIP switch 1 is turned ON, it outputs 0-10V and 4-20mA.
Wiring definition code and description
INPUT
E+
S+
S-
GND
GNDD
Sensor input
Sensor Power
Positive
Sensor Signal
Positive
Sensor Signal
Negative
Sensor Power
Positive
Shield
OUTPUT
24V
IO
VO
GND
GNDD
Transimitter output
Transimitter Power Positive
Current Signal Output
Voltage signal Output
Transmitter Power
Negative(0V)
Shield
Vzero
Vspan
Izero
Vspan
Voltage Zero Point Adjustment
Voltage Full Degree Adjustment
Current Zero Point Adjustment
Current Full Degree Adjustment

About debugging:

1.Zero adjustment First make the system in the no-load state. When the input signal is current, adjust the mark "Izero" potentiometer to adjust the deviation of the zero point. When the output is a voltage signal, adjust the potentiometer marked “Vzero” to adjust the deviation of the zero point. Adjust the indication value to (current or voltage) zero point indication value; 2.Gain adjustment Load the system with a certain weight value (recommended range is 60% ~ 100%), calculate the output value according to the proportional relationship between the loaded weight and the maximum weighing value, and adjust the mark as "Ispan" (current full scale potentiometer) or "Vspan ”(Voltage full-scale adjustment potentiometer) to adjust the display value to the load ratio. 3.Review Make the system in the no-load state and measure the zero output; load a certain weight value and measure whether the output meets the expected magnification. If not, repeat steps 2 and 3 to adjust again.

Note:

After the adjustment is completed, the adjusting end of the potentiometer should be fixed with sealant or nail polish to prevent vibration and other factors from changing the resistance value of the potentiometer.


Precautions for use:

The sensor input and transmitter output wiring must be correct to avoid damage to the sensor or transmitter due to reverse polarity. Prohibit live operation when wiring Try not to install the transmitter in places with high humidity and vibration.


FAQ
1. What is the MOQ?
If we don’t have it in stock, the MOQ is different according different models.
If we have it in stock, we can ship you even 1 pc as sample.
2. What is lead time?
If we have it in stock, we can ship it to you within about 3-5 working days.
If we don’t have it in stock, the lead time will be 10-30 days normally.
3. What is the payment terms?
T/T, Western Union, Paypal, Escrow alibaba is acceptable.
Escrow is same like paypal, after you place the order and make the payment on alibaba.com, alibaba company will notify us to make the shipment, your money won’t be released until you get the goods.
If we don’t make the shipment, you still can take back your money.
4. What is the express delivery?
DHL, Fedex, TNT ,EMS, UPS etc.
We will choose the safe and cheapest way for you to reduce your cost.
Economic shipping way: by sea, by air transport .
If you place mass order with us, the shipping way of by sea or by air transport will be ideal choice.
5. What is the quality guarantee?
Quality guarantee: 12 months.
If the product has quality problem within 12 months, please return it to us, we will repair it; if we can’t repair it successfully, we will give you a new one; but the man-made damage, improper operation and force majeure will be excepted. And you will pay the shipping cost of returning to us, we will pay the shipping cost to you.
6. Is there any after-sale service?
After you receive our product, if you have any questions or need any assistance, we can provide you the after-sale service by e-mail, skype, trade manager, telephone and QQ etc.

Looking for ideal Electronic Junction Box Manufacturer & supplier ? We have a wide selection at great prices to help you get creative. All the Digit junction box are quality guaranteed. We are China Origin Factory of Analog junction box. If you have any question, please feel free to contact us.

Product Categories : Junction Box and Load cell Accessories > 4 Ways Junction Box

Send Inquiry

Anna An

Ms. Anna An

Tel:86-574-55878359

Fax:86-574-26885771

Mobile Phone:+8613777035881

Email:sales@santwell.com

Address:NO.332, BUILDING-5, FUBON PLAZA,BEILUN AREA, Ningbo, Zhejiang

Home

Phone

About Us

Inquiry